Water leakage sensor Aquatronica The water leakage sensor is used to detect feasible leakages of water on flat surfaces where the aquarium is positioned: in this way, based on how it is programmed, certain functions can be enabled or disabled and/or some alarms can be triggered to minimize damages. ACQ320 Water leakage sensor It can detect both...

Level sensor Aquatronica The level sensor is used to check the level of water in the aquarium or in an external filter (sump), providing, for example, the possibility to top-up the water automatically thanks to the controller’s special program. Product Description ACQ300 Level sensor The level sensor can be connected to the dedicated...

Low conductivity electrode Aquatronica The low conductivity electrode is used to measure the Soft Conductivity value in continuous immersion in soft water aquariums. Product Description ACQ310N-MS Low conductivity electrode It must be connected to the power unit through the dedicated interface. Thanks to the the Aquatronica...

ORP electrode Aquatronica The Redox electrode (ORP) is for measuring the ORP value in the aquarium in continuous immersion. Product Description ACQ310N-RX Redox electrode It must be connected to the power unit through the dedicated interface. Thanks to the Aquatronica systems flexibility, it is possible to simultaneously connect...

pH electrode Aquatronica The pH electrode is for measuring the pH level on an aquarium in continuous immersion. It must be connected to power units through the appropriate interface. Product Description ACQ310N-PH pH Electrode Thanks to the Aquatronica systems flexibility, it is possible to simultaneously connect and monitor...

USB  interface Aquatronica Thanks to this kit, the Aquarium Controller system can be connected to a PC to download data, program settings and run software updates Product Description ACQ222 USB PC KIT The USB PC kit consists of a USB PC interface and a PC software. With this kit the Aquarium Controller...

Water leakage interface&nbsp;Aquatronica The water leakage interface is used to connect one or two water leakage sensors to the system. By using this interface, combined with the relevant water leakage sensor (code ACQ320), you can detect feasible leakages of water and act consequently on the multi-outlets connected. Product Description ACQ210N-WL<br...

High&nbsp;Range Conductivity Interface&nbsp;Aquatronica High&nbsp;Range Conductivity Interface for measuring and checking the value of the Conductivity in reef/marine&nbsp;aquariums, by connecting an Aquatronica Low Range conductivity electrode. Product Description ACQ210N-MS High&nbsp;range conductivity interface The moment the interface...

Temperature &amp; level Interface Aquatronica The Temperature &amp; Level Interface lets the user connect additional Aquatronica temperature and level sensors. Product Description ACQ210N-TL Temperature &amp; Level interface The moment the interface is connected to the system, it will automatically identify the sensor “Plug &amp; Play” as...

pH&nbsp;Interface Aquatronica PH Interface for measuring and checking the pH in the aquarium, by simply connecting an Aquatronica pH electrode. Product Description ACQ210N-PH pH Interface The moment the interface is connected, it will automatically be identified by the system &ldquo;Plug & Play&rdquo; as well as enable the relevant...

Redox Interface Aquatronica Redox Interface for measuring and checking the ORP value (Oxide-Reduction Potential) in the aquarium, by connecting an Aquatronica ORP electrode. Product Description ACQ210N-RX Redox Interface The moment the interface is connected, it will automatically be identified by the system &ldquo;Plug & Play&rdquo; as...

Dissolved oxygen Interface Aquatronica The interface for Dissolved Oxygen allows to connect the probe for Dissolved Oxygen, to the system part of the Power Bar Aquatronica, to continuously measure and control the value of dissolved oxygen O2 in freshwater or water aquariums sea. As soon as this Plug &amp; Play interface is connected to the Power Bar...