Rift left 66 x 15 / 25cm
Fresh water and sea water, neutral.
These decorations are to stick inside on the rear window of the aquarium.
Rectangular shapes.
Can be cut with a diamond disc saw.
Very fine background decorations
These plates of 'plastic-ceramic' composite material, neutral, are to be placed inside the aquarium, against the bottom wall.
Backdrops
Background decor with ceramic stacking
Fault effect with "rifts" backdrops
Fault effect and ceramic decoration on the front
These funds can be used alone, or supplemented, in the foreground, by a decoration based on ceramic rocks to be stacked. We then obtain a homogeneous whole, of very natural appearance, with caves and passages.
Neutrality and use
Excellent neutrality of the materials used, even after cutting the plates with a grinder (equipped with a diamond disc) for possible adaptation to the size of the aquarium.
This product does not contain polyurethane foams or resins and has no problem of aging or release of toxic compounds.
The funds can be used without retouching: full background, partial background,
or be cut, drilled to adapt to the technical constraints of the aquarium.
2 solutions for installation:
stick the silicone plates (final) or wedge them between the bottom and the top reinforcement, if necessary, wedge.
Realize on the front a decoration with our ceramic rocks (harmony of tones and materials).
Aquarium background decors from 110 to 130 cm
Backdrops in Trigon Corner Aquarium
eWall background and ceramic rocks
Director David - Aquascale
Full background
Use rectangular plates
For a 120 cm tray, use 3 plates width 39 cm (these plates width 39 cm exist in 3 heights: 45 cm, 55 cm, 66 cm.)
Partial background with fault effect
Use the rifts and a plate width 39 cm, put a black or blue background behind the aquarium for effect of depth.
For a 100 or 120 cm tray: 1 plate width 39 cm, a right rift and a left rift. This solution is both aesthetic and practical (avoids cutting the plates for dimensions where there would be recuts)
Housing:
To hide settling, clear passages for pipes etc ...
Cutting with diamond disc saw.
Possibility of drilling passages for water outlets: heat gently with a heat gun and clear with a screwdriver.
No customer reviews for the moment.