Homogeneous, brilliant and very bright light through a balanced mix of selected high-power LEDs in natural colors (CRI > 95, white LEDs > 150 lm/W)
Maximal output power with GHL Power Balancing Technology®
Super smooth dimming with GHL Perfect Dimming Techology®
Uniformly wide light distribution with a LED beam angle of 120°
Energy efficiency and long LED life thanks to sophisticated heat management (generously dimensioned heat sink, highly efficient heat conducting foil and temperature monitoring) – LED life at least 60,000 operating hours
If controlled by the ProfiLux Aquarium Controller: Professional light dimming, individual mix of the color spectrum and water temperature-dependent downward control (light is dimmed if water gets too warm).
Full undimmed Lightpower when operated without ProfiLux (all LEDs light up to 100%)
Energy saving compared with traditional lighting aprox. 50%
Operation with safe voltage (24V)

Optimal for Every Aquarium
The Mitras light bar is suitable for any marine or freshwater aquarium – if open or closed – and is available in 4 light temperatures in 13 different lengths in 10 cm increments. Due to the high variety of offered lamp lengths you will find the tailor-made lighting exactly for your aquarium.

Get the desired light output in your aquarium: With Mitras Lightbar there is no compromise by only a few offered lengths, forget badly illuminated corners in the aquarium.

Adjust – in conjunction with the ProfiLux Aquarium Controller – the light spectrum (approximately 380-700 nm range) and the light output in wide areas exactly as you like and give your plants, fish and corals the light they need to thrive. The correct light spectrum used is equally as important as the radiation power that can be achieved.

When choosing the Mitras® Lightbar, it is very important to consider how this light will be used; we offer different models to suit different uses. Each model is equipped with special LED combinations perfectly matched for different applications such as Freshwater, upper, medium and deep reef. Of course you can also combine the different models as you like.

Natural light scenarios
Achieve realistic lighting in combination with a ProfiLux aquarium computer:

Sunrise and sunset
moon phases
dawn
clouds
thunderstorms
rainy days
tropical twilight
Seasonal change
acclimatisation

Diverse Dimming Functions with ProfiLux
Realistic lighting scenarios such as sunrise, sunset, moonlight, cloud, seasonal lighting and thunderstorm simulations are made possible with GHL Perfect Dimming Technology®. With over 4000 dimming levels and a dimming ratio of 3000:1 per channel (light color), you can accomplish true-to-life simulations.

Bright Illumination
Ultra Bright
Extremely high luminous output at maximal energy efficiency. Selected high-power LEDs (CREE®, OSRAM®, Semi LEDs®) with at least 150 lumens/watt (white LEDs). The special arrangement of the LEDs over the entire Lightbar length provides a particularly homogenous illumination of the tank.

Microprocessor
Special LED Overheat Protection
LEDs are protected by monitoring the operating states of LEDs and of the lightbar temperature. The microprocessor-controlled automatic brightness reduction and the very powerful and massive heat sink ensure efficient and safe operation with maximum light output.

FreshwaterAQ_MitrasLB
Unique Color Mix
Ideal light spectra for salt and fresh water tanks. The unique light mixing ensures high photosynthetic efficiency for lush growth of plants and corals.

The picture shows the development of a freshwater basin under 2x Mitras LB Daylight in the course of 28 months.

h
Large Range of Models – Flexible Usage
13 different lengths in 10 cm-increments are available – also for Nano-Tanks – You’ll be able to find the ideal lightbar length for your tank. Illumination over the total tank length provides a maximum light quantity for the tank and avoids only little illuminated corners.
Several Mitras Lightbar can be connected via a splitter to one power supply unit – this way you have less power supply units and less cables in your cabinet.

Available with 4 different LED-combinations (Daylight, Ocean Blue, Actinic, Deep Actinic).

GCC-Lightcomposer Mitras LX Customizable Color Mix with Clorophyll A & B Graphs
Variable Light Spectrum
Adjust easily the desired light spectrum within a wide range with the Light Composer using the PC Software, GHL Control Center (GCC). Light color and intensity can be varied over the day.

Either you just take over one of the existing lighting projects for your luminaire, or submit your own project.

fish skinHoher CRI der Mitras Lightbar (>95) sorgt für brillante Farben
Brilliant and Natural Light
The high CRI of Mitras Lightbar (> 95) ensures a brilliant and natural color reproduction.

Waterproof

According to IP 67

Energielabel_MitrasLightbarEnergielabel Mitras Lightbar
Energy Label
Mitras Lightbar – Luminosity in Detail
Mitras lightbar is not only one of the brightest LED lights on the market. It also convinces by the technical know-how.

Mounting in the tank
With the supplied stainless steel brackets, Mitras Lightbar 2 can be conveniently mounted above every tank.

If there is not enough space in the tank, a flat bracket is also available.

Suitable Light Spectrums for Specific Applications
For an optimal lighting result, we offer four different types with different LED combinations to choose from:

Mitras LB Daylight (Freshwater with many plants)
Mitras LB Ocean Blue (Freshwater and Salt Water)
Mitras LB Actinic (Saltwater upper to medium reef)
Mitras LB Deep Actinic (Saltwater medium to deep reef)
They differ in terms of the average color temperature and are tailored to the specific application.

If operated with the ProfiLux Aquarium Controller the offered selection of several LED colors gives the opportunity to adjust the light color via GCC within far bounces. However the Luminaires should be chosen in a way that the average light color matches as good as possible. The higher the light temperature is, the more bluish the light appears.

Mitras Lightbar Daylight
Spektrum_DaylightLightbar Mitras Daylight - Spectrum: All channels at 100%
Recommended for Freshwater with many plants

Mid color temperature: 5500 K

5 Color Channels (dimmable via ProfiLux)

LED-Configuration per 10 cm Lightbar:

2x 6500 K
2x 4500 K
4x RGB (red, green and blue)
White LEDs with min. 150 lm/W

Mitras Lightbar Ocean Blue
Spektrum_Ocean BlueLightbar Mitras Ocean Blue - Spectrum: All channels at 100%
Recommended for Freshwater and Saltwater

Mid color temperature: 9000 K

7 Color Channels (dimmable via ProfiLux)

LED-Configuration per 10 cm Lightbar:

1x Royal blue
1x 8000 K
1x 6500 K
1x 4500 K
4x RGB (red, green and blue)
White LEDs with min. 150 lm/W

Mitras Lightbar Actinic
Spektrum_ActinicLightbar Mitras Actinic - Spektrum: Spectrum: All channels at 100%
Recommended for Saltwater

Mid color temperature: 14000 K

7 Color Channels (dimmable via ProfiLux)

LED-Configuration per 10 cm Lightbar:

1x Hyperviolett
1x Royal blue
1x 8000 K
1x 6500 K
4x RGB (red, green and blue)
White LEDs with min. 150 lm/W

Mitras Lightbar Deep Actinic
Spektrum_DeepActinicLightbar Mitras Deep Actinic - Spektrum: Spectrum: All channels at 100%
Recommended for Saltwater

Mid color temperature: 18500 K

7 Color Channels (dimmable via ProfiLux)

LED-Configuration per 10 cm Lightbar:

1x Hyperviolett
1x Royal blue
1x 8000 K
1x Deep blue
4x RGB (red, green and blue)
White LEDs with min. 150 lm/W

How Many Mitras Lightbar do I need for my Aquarium?
Select Mitras Lightbar depending on the aquarium volume.

Rule of thumb:

low light requirement: 0.3 watts per liter
very high light requirements: 0.9 watts per liter
Often, a recommendation “lumens per liter” is given. In our opinion this makes only sense for Mitras Daylight. For luminaires with high blue light component (Ocean Blue, Actinic, Deep Actinic), the lumen specifications are rather misleading (see explanation above Lumen, LUX and PAR).

Operation Modes
Mitras Lightbar can be operated undimmed and dimmed.

If operated undimmed all LEDs will burn at 100%. There is no control needed. Activation and deactivation can be made through a simple timer.

Another option, however, is to dimm and operate the Mitras Lightbar with a ProfiLux Controller (starting version 3). All color channels can thus be dimmed independently. So all of the ProfiLux Controllers simulation programs such as sunrise and sunset, cloud simulation, thunderstorms or calendrical moon phase simulation are possible.