Connection cable ProfiLux<->Tunze for adjustable current pumps at L1(L3)
The adapter cable Tunze 1 controls via the interface L1/L3/L5.
If you would like to control efficiently two current pumps at one dimming channel, you need Tunze 1, Tunze 2 cables and splitter cable YL2, which you can get in three different lengths (1 m, 2,5 m and 5 m).
With the adapter cables Tunze 1 and Tunze 2 you can connect and control adjustable Tunze current pumps directly via your ProfiLux controller.
This way you can simulate waves and currents of the sea close to nature in your tank and synchronize it with other cycles in your tank (like e.g. a feeding pause or the illumination (lightning with storm and a high swell)).
With the help of the free software ProfiLux Control the different current programs of ProfiLux can be set comfortably and can be varied if necessary.
The control of the pumps via the programs is really motor-friendly through the smooth change between minimal and maximal current speed.
The connection is made via the sockets of the 1-10 V interfaces L1/L2 or L3/L4 or L5/L6.
The adapter cable Tunze 1 controls via the interfaces L1/L3/L5, the cable Tunze 2 controls via L2/L4/L6 .
If you like to control two current pumps efficiently via one dimming channel, you need besides the cables Tunze 1 and Tunze 2 the splitter cable YL2, which is available in three different lengths (1 m, 2,5 m and 5 m).
No customer reviews for the moment.