Installing a 32mm PVC plug is simple. Start by cleaning and degreasing the surfaces of the pipe and plug. Then apply a special PVC glue to both parts, quickly fit the plug onto the pipe, rotating slightly to distribute the glue well. Maintain pressure for a few seconds to ensure good adhesion. Allow to dry completely according to the glue instructions before putting the system back into water.

This plug is designed to fit standard 32mm outer diameter PVC pipes. It is important to check that the inner diameter of the plug corresponds to the outer diameter of your pipe to ensure optimal sealing. If you are using pipes of another material, such as PE or copper, this PVC plug will not be suitable and you will need to use a specific fitting.

To maintain the sealing of the PVC plug in the long term, it is advisable to regularly check the condition of the bonding and the absence of cracks or deformations. If you notice signs of aging or deterioration, replace the plug without delay. Also avoid subjecting the plug to excessive mechanical stress or extreme temperatures, as this could compromise its sealing.