Good for sea water aquariums up to 1,000 liters.
Immersion depth from 140 to 240 mm without adjustment.
Dimensions without postfilter (L x L x H): 250 x 180 x 415 mm
Water flow: 900 l / h
Air flow: 600 l / h
Consumption: 11 W, 230V / 50Hz (15 W, 115W / 60Hz)
Volume of bucket: 0.7 liter


How to determine the right doc Skimmer for your Aquarium Marine?
Depending on the selected biotope, each Aquarium Marin has a clean requirement in terms of skimming. Starting from the example of a classic marine aquarium populated mainly of soft corals, the sizing of theskimmer Equal tray capacity may vary depending on the type of biotope. Therefore, the useful volume recommended for a skimmer Tunze given must be decreased or decommissioned in the case of use in more demanding biotopes.


Reduced sensitivity, without decommissioning
The ...
Aquariums of soft corals, hard corals LPs with long polyps or anemones support and sometimes even require some organic load.
In this type of biotopes, the aquarium volume recommended for Doc Skimmer is used without decommissioning.

Average sensitivity, 40% decommissioning
A medium sensitivity more often concerns "mixed" aquariums of soft corals, sps hard corals, filter animals and sponges. These biotopes most often require a decommissioning of the order of 40% compared to the scoop data.
A Skimmer doc planned for 1,000 liters are used for an aquarium until max. 600 liters.

High sensitivity, 60% decommissioning
Aquariums with a predominance of sps hard corals require a very good quality water, without accumulations of nitrates or phosphates. Oxygen saturation and crystalline water are mandatory, the skimmer of these biotopes works most often in "Stand Alone" solution.
A Skimmer doc planned for 1,000 liters are used for an aquarium until max. 400 liters.

High sensitivity and high stand, 70% decommissioning
Sps Hard Coral Aquariums with a strong fish population require a very high skimage capacity. In this case, the skimmer must be able to ensure a water of excellent quality despite the strong fish load. In operation "Stand Alone", it must be particularly efficient.
A Skimmer doc planned for 1,000 liters are used for a max. 300 liters.

Especially for Doc Skimmer in contact with a breeding tray with plankton, 70% decommissioning
Hard coral aquariums or livestock bins with living plankton particularly require high quality water. Oxygen saturation and crystalline water are mandatory.
A Comline Doc Skimmer for 1,200 liters must be used to a maximum for a 360 liter aquarium.

Tunze Doc Skimmer 9410
Ecumer, filter and ventilate a seawater aquarium without consuming energy, it's impossible. But no market appliance can consume less electricity than Tunze Doc Skimmer 9410, at least comparable. With only 11 W (15 W), the Skimmer doc has succeeded this challenge. In addition, it does not require adjustments, is very quiet and practical use.

For aquariums up to 500 liters:
Standard aquarium of approx. (L x L x H) 500 x 300 x 400 mm, 6 mm glass thickness.
Water level: 150 mm, safety volume approx. 37 liters.

ENERGY SAVING


Ecumming bucket Ø160 mm from ...
Large capacity and easy to extract, also incorporates the reactor.


Booster Ring allows regulation ...
Fine of the skimp power and adapts the skylight's internal water level to obtain a more or less dry foam.

Removable mechanical filtration postfilter on ...
Nylon fibers 300 μm at the edge outlet with reduced biological effect. This filter does not promote the formation of nitrates, even during long cleaning intervals. It can also be filled with filter masses such as activated carbon or anti-phosphates.

Stable base, also has a ...
Function for reducing the water circulation speed at the bottom of the skimmer.

Tunze Hydrofoamer silence 9410.040 is ...
a pump Air-water mixture specially designed for protein skimmers. Hydrofoamer generates a large amount of fine air bubbles with a diameter of between 0.1 and 0.3 mm. It only requires 11 W (15 W) power consumption for 600 l / h airflow, which places it at the forefront of performance in this product class. With 900 l / h of water flow, the hydrofoamer also provides the water supply of the skimmer.


The mixing room with ...
Double brewing flow ensures high binding efficiency of organic substances.

Intermediate room with water from ...
Phase: The anti overfoaming system principle prevents the overflow of the skimmer by boiling and regulates the skin sensitivity according to the surface tension of the water of the aquarium and the water level in the filter. The skimmer works alone and automatically adapts its packed power to the best possible efficiency.

Ozone pipe fitting. Ozone ...
Improves the skimmer efficiency and eliminates water from the aquarium all coloring substances.

Doc Skimmer 9410

Good for sea water aquariums up to 1,000 liters.
Immersion depth from 140 to 240 mm without adjustment.
Dimensions without postfilter (L x L x H): 250 x 180 x 415 mm
Water flow: 900 l / h
Air flow: 600 l / h
Consumption: 11 W, 230V / 50Hz (15 W, 115W / 60Hz)
Volume of bucket: 0.7 liter


How DETERMIN THE GOOD DOC SKIM For your marine aquarium?
Depending on the selected biotope, each marine aquarium has a clean requirement in terms of skimming. Starting from the example of a classic marine aquarium populated mainly of soft corals, the somensioning of the equal bin capacity skimmer may vary depending on the type of biotope. Therefore, the useful volume recommended for a skimmer Tunze given must be decreased or decommissioned in the case of use in more demanding biotopes.


Reduced sensitivity, without decommissioning
The ...
Aquariums of soft corals, hard corals LPs with long polyps or anemones support and sometimes even require some organic load.
In this type of biotopes, the aquarium volume recommended for Doc skimmer is used without decommissioning.

Average sensitivity, 40% decommissioning
A medium sensitivity more often concerns "mixed" aquariums of soft corals, sps hard corals, filter animals and sponges. These biotopes most often require a decommissioning of the order of 40% compared to the scoop data.
A Skimmer doc planned for 1,000 liters are used for an aquarium until max. 600 liters.

High sensitivity, 60% decommissioning
Aquariums with a predominance of sps hard corals require a very good quality water, without accumulations of nitrates or phosphates. Oxygen saturation and crystalline water are mandatory, the skimmer of these biotopes operates most often in "Stand Alone.
A pre-meadow Skimmer