

The Aqua Medic DC Runner 600 pump is the ideal solution for ensuring optimal water circulation in your freshwater or saltwater aquarium. Designed for durable performance and ultra-quiet operation, it integrates seamlessly into any aquatic environment.
The DC Runner 600 from Aqua Medic is a universal pump designed to meet the needs of freshwater and saltwater aquariums. Its main advantage lies in its ultra-quiet operation, achieved through optimized control electronics. This feature makes it an ideal choice for aquarists concerned about the sound comfort of their environment.
This pump can be used in two ways: as a circulation pump, to create a water current beneficial to aquatic life, or as a feed pump, to ensure water circulation to a filter or skimmer. Its robust pump body guarantees a long service life, even under intensive use conditions.
The 24 V DC motor of the DC Runner 600 is both energy efficient and powerful. The polished bearings and ceramic shaft contribute to quiet and maintenance-free operation for many years. The pump is designed for underwater use only, ensuring optimal safety.
The delivery includes a 24 V transformer for easy and quick installation.
| Characteristic | Detail |
|---|---|
| Type | DC Runner 600 |
| Pump voltage | 24 V |
| Transformer voltage | 100 - 240 V / 50 - 60 Hz |
| Pump flow rate | Up to 600 l/h |
| Max. discharge height | Up to 1.7 m |
| Power consumption | Max. 8 watts |
| Flow side connection | 13 mm |
| Protection | IP X8 |
| Approx. dimensions in mm (l x w x h) (including pre-filter basket) | 87 x 43 x 58 |
| Approx. dimensions in mm (l x w x h) (without pre-filter basket) | 64 x 43 x 58 |
Yes absolutely. The DC Runner 600 is designed for use in both fresh and salt water. Its components are resistant to salt corrosion, ensuring a long service life even in a marine environment. However, it is crucial to rinse the pump thoroughly with clear water after each maintenance to remove salt residue and ensure proper operation.
Maintenance of the DC Runner 600 is relatively simple. It is recommended to clean it regularly, about once every one to three months, depending on the organic load of your aquarium. Disassemble the pump and rinse the various parts (rotor, pump body) with clear water. You can use a small soft brush to remove limescale or algae deposits. Be sure to reassemble the pump correctly after cleaning.
Although the DC Runner 600 can be used either as a circulation pump or as a return pump, it is not advisable to use it for both functions at the same time. Its design is optimized for one or the other application. If you need both functions, it is best to use two separate pumps to ensure optimal performance and avoid damaging the pump.
No customer reviews for the moment.

The Aqua Medic DC Runner 600 pump is the ideal solution for ensuring optimal water circulation in your freshwater or saltwater aquarium. Designed for durable performance and ultra-quiet operation, it integrates seamlessly into any aquatic environment.




