Titanium S3 is an TDS meter in-line, with 3 probes, whichallows you to measure, simply and accurately control dissolved solids (TDS) at 3 locations of your choice, typically at the inlet, before the deionization cartridge and at the outlet of a reverse osmosis plant. It permits, for example, to see immediately whether the water quality at the outlet of an osmosis plant is pure or not. It is also a very good indicator for changing filter cartridges or the reverse osmosis membrane.

Titanium S3 features 3 titanium probes, which offer excellent corrosion resistance. It can be calibrated regularly for accurate results. its rear panelmagnetic makes it easy to install on the metal frame of an osmosis plant.

Titanium S3 shuts down automatically after 3 minutes of non-use to preserve battery life.

Titanium S3 can be installed very easily using the "T"Push Connect ¼" fittings (included). Simply cut the tubing where measurements are desired, insert the supplied fittings and then insert the electrodes.