Additives
Aquarium
Automation
Heating/cooling
Lighting
Skimmer
Filtration
Osmolator/RO
Spare parts
Pump
Reactor
Subsrtats
Others
Aeration
Aquascaping
CO2
Scenery
Fertilizer
Cleaning
Food
Construction
Care
Pump
Food
- New
4 electrodes 12mm measuring cell
€149.90
Tax Included
Deported measurement solution for large volumes and basins
The AquaCare DFMZ measuring cell is designed to overcome distance constraints between your basin and your electronics. By allowing the installation of 4 bypass probes (bypass), it guarantees accurate and stable measurement of your parameters, even when your technical room is remote.
- Polyvalence: Receives up to 4 standard probes (pH, Redox, Conductivity, Temperature).
- Standard 12mm: Compatible with the majority of electrodes in the market.
- Bypass installation: Simple mounting on circuit pump for a constant flow.
- Industrial Quality: Robust materials (PVC, PE, ABS) for maximum durability.
Secure paymentCB or bank transfert
We send worldwide! Register to see costs
Question? Contact us, we answer quickly!
AquaCare DFMZ: Technology for precision for basins and large tanks
In large tank or aquarium facilities, measurement areas are often remote from controllers. Analog electrode cables must not exceed a critical length of about 5 meters to avoid interference and signal loss, the AquaCare 4 electrodes measuring cell offers the ideal solution: bring water to the probes, not the reverse.
A powerful Bypass system
This measuring cell (or chamber of passage) connects via a bypass circuit (bypass) using a pump. Your water aquarium or basin flows through the cell fluidly, passes in front of the sensors, then returns directly to the system. This continuous flow ensures that the electrodes are always in contact with water representative of the real parameters of your tank.
Multi-parameter measuring capacity
The DFMZ cell allows you to install up to 4 measuring sensors with a diameter of 12 mm. You can centralize the monitoring of:
- Potential pH
- Potential Redox (ORP)
- The conductivity (salinity or hardness)
- The temperature
Note: If you do not use the 4 locations, unexploited connections can be hermetically sealed using plugs (plugs) included.
Technical Data and Dimensions
| Characteristics | Detail |
|---|---|
| Reference | DFMZ |
| Number of connections | 4 sensor slots |
| Sensor diameter | 11 mm to 12 mm |
| Cell diameter | 110 mm |
| Total height | 170 mm |
| Materials used | PVC, PE, PA, ABS, NBR |
| Plumbing connections | PVC fittings 20 mm |
| Unladen weight | 670 g |
The advice of the expert RecifArt: To ensure the accuracy of your measurements over the long term, we recommend placing this cell on a mechanically filtered water circuit. This will prevent the accumulation of sediment or debris on the sensitive tip of your electrodes. Also consider calibrating your probes regularly by insulating the cell with stop valves on your bypass circuit.
Frequently Asked Questions: AquaCare DFMZ 4-electrode Measurement Cell
What is the AquaCare DFMZ measurement cell for?
The DFMZ measuring cell is designed for large aquariums and basins where the technical area is far from the main basin. Since analog electrode cables must not exceed 5 meters to avoid signal loss, this cell allows water to be brought directly to the sensors via a bypass system.
How many probes can be installed in this measuring chamber?
This cell can accommodate up to 4 probes simultaneously. It is compatible with standard sensors of 12 mm diameter, such as pH, Redox potential (ORP), conductivity or temperature probes. If you use less than 4 probes, unused ports can be condemned with plugs.
How does the AquaCare cell fit into a water circuit?
The cell connects via a bypass using 20 mm PVC connectors. A dedicated pump pushes water from the basin to the measuring cell, and the water is then returned to the aquarium or basin after passing in front of the electrodes.
What are the technical characteristics of the DFMZ cell?
- Dimensions: Diameter of 110 mm for a height of 170 mm.
- High quality materials: Robust PVC, PE, PA, ABS and NBR joints design for maximum durability.
- Probe compatibility: 4 positions for sensors of 11 to 12 mm diameter.
- Weight: 670 g.
- Connections: 20 mm PVC outputs and inputs.
Why is it preferable to use a flow cell rather than a conventional probe carrier?
In large installations, the AquaCare flow cell guarantees a stable and accurate measurement by isolating the probes from the direct disturbances of the basin, while allowing easy maintenance without having to plunge hands into the aquarium water.
DFMZ
1 Item
Specific References
No customer reviews for the moment.
Customers who bought this product also bought:
Deported measurement solution for large volumes and basins
The AquaCare DFMZ measuring cell is designed to overcome distance constraints between your basin and your electronics. By allowing the installation of 4 bypass probes (bypass), it guarantees accurate and stable measurement of your parameters, even when your technical room is remote.
- Polyvalence: Receives up to 4 standard probes (pH, Redox, Conductivity, Temperature).
- Standard 12mm: Compatible with the majority of electrodes in the market.
- Bypass installation: Simple mounting on circuit pump for a constant flow.
- Industrial Quality: Robust materials (PVC, PE, ABS) for maximum durability.
4 electrodes 12mm measuring cell
€149.90
Tax Included