Refill depot 16l with cap and tap Dimensions (l x w x h): app. 320 x 170 x 310 mm Total height incl. cap: app. 380 mm

Refill depot 16l with cut-out and cap Dimensions (l x w x h): app. 320 x 170 x 310 mm Total height incl. cap: app. 380 mm

Support for sensor

Optical floating level sensor for Kore 5th Optical floating level sensor with acrylic adjustable holder

12v 1/4" solenoide

Overfill Level sensor 3 meters câble length. Running from 0 to 110v (12v and 24v included).

Level-Sensor,&nbsp;Floater V2 Level sensor, Floater with Mini-DIN-plug and 3 m cable. Only suited for a vertical mounting (sensor fastener PL-LF-S8) The ProfiLux controller offers the following options with the level sensors: Auto Top Off with one sensor Auto Top Off with two sensors (min and max) Automatic Water Change<br...

Wall brackets It is not always convenient to suspend a pendant from the ceiling. As an alternative, these brackets can be attached to the wall behind the aquarium. The arms of the bracket extend out above the aquarium, and the pendant can be suspended from any one of the mounting points. These brackets are available in the 6 standard colours of our lightings.

RO water controller TUNZE RO Water Controller 8555 is an automatic water level controller used in the collection container of TUNZE RO station. The controller is also suitable for other water tanks or can be connected to an automatic refill system. It consists of a controller, two sensors, a water valve and an 12 V power supply unit. Depending on the use, the...

Osmolator Deltec Aquastat 1001 The Aquastat 1001 is used in combination with a water reservoir and a pump to replenish evaporated water.

Water valve operating on low voltage 9 to 12 V DC, replaces the enclosed meter pump in the Osmolator for several aquariums with gravity line, for example.

Storage container 13L Container with a contents of 13L (3.4 USgal.); size for an open 250L (66 USgal.) tank: fill lasts for approx. one week, diam. 27,7 x 24,2 x 27cm (8.9 x 9.5 x 10.6 in.)