WATERBAG TRANSPORT 20L The Waterbag can be used to transport water (mineral, marine, osmosis, etc.). With a capacity of 20 liters, it is sturdy and foldable, saving valuable space for storage in pet shops and at home. It features a carrying handle and a tap for easy pouring of water into the aquarium.

Oceamo Lab RO Water analysis The suitability of tap water for aquaristic use can also be checked with this analysis. At Oceamo, these samples are given full attention: because problems often arise in the reef tank already during the treatment of the source water. Our instruments are specially calibrated for your pure water samples, and we examine your sample for all...

ICP-MS Seawater Analysis (sea water) Use the ICP-MS analysis to get a much more detailed view of pollutants and trace elements in your reef aquarium. With the Oceamo ICP-MS Analysis, your seawater analysis is performed with ICP-MS (instead of ICP-OES). ICP-MS (ICP with mass spectrometry) is significantly more sensitive and offers up to 10,000 times lower detection...

Oceamo Lab Classic Water analysis Use our Oceamo Lab Classic analysis to determine all essential chemical parameters in the reef aquarium: Oceamo Seawater analysis Basic parameters:       alkalinity, salinity Macro elements:         boron, bromide, calcium, chloride, potassium, magnesium, sodium, strontium, sulfate Trace elements:          barium,...

Power cord Y IEC 320 10a / 250V Plug: IEC 320 C14 male Socket: 2X Nema 5-13R V Specification: 3 × 0.75 mm² Cable length: 30CM Material: oxygen-free copper The sockets are nickel-plated

Block 10 electrical outlets 10 takes Cable length 1.5m 2 separate lines (2 x 5 sockets) Overload protection Max power 3680w 3G cable 1.5 Child protection Wall fixation 2 years warranty

Apogee Protective carrying case Protective carrying case designed to transport and store Apogee meters, sensors, and accessories. Please note, this case does not fit the AM-320 underwater wand. It will fit a AM-310 telescopic wand, but that wand is not recommended for underwater use. Dimensions (LxWxH): Width approx. 27 cm Height approx. 16,5...

PAR meter MQ-510 The MQ-510 quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware. The meter consists of a waterproof quantum sensor attached via waterproof cable to a handheld meter. The waterproof sensor incorporates a blue-enhanced silicon photodiode...