Oceamo Lab RO Water analysis The suitability of tap water for aquaristic use can also be checked with this analysis. At Oceamo, these samples are given full attention: because problems often arise in the reef tank already during the treatment of the source water. Our instruments are specially calibrated for your pure water samples, and we examine your sample for all...

ICP-MS Seawater Analysis (sea water) Use the ICP-MS analysis to get a much more detailed view of pollutants and trace elements in your reef aquarium. With the Oceamo ICP-MS Analysis, your seawater analysis is performed with ICP-MS (instead of ICP-OES). ICP-MS (ICP with mass spectrometry) is significantly more sensitive and offers up to 10,000 times lower detection...

Oceamo Lab Classic Water analysis Use our Oceamo Lab Classic analysis to determine all essential chemical parameters in the reef aquarium: Oceamo Seawater analysis Basic parameters:       alkalinity, salinity Macro elements:         boron, bromide, calcium, chloride, potassium, magnesium, sodium, strontium, sulfate Trace elements:          barium,...

Schego titanium heater 300w The titanium heating elements from Schego are the optimum supplement to the temperature controller TR 1000. Their power range extends from 50 to 600 watts. They are manufactured from high-quality titanium tube, therefore indestructible and sea water-proof. All Schego titanium heating elements are grounded and correspond to the high...

Schego titanium heater 200w The titanium heating elements from Schego are the optimum supplement to the temperature controller TR 1000. Their power range extends from 50 to 600 watts. They are manufactured from high-quality titanium tube, therefore indestructible and sea water-proof. All Schego titanium heating elements are grounded and correspond to the high...

Schego titanium heater 100w The titanium heating elements from Schego are the optimum supplement to the temperature controller TR 1000. Their power range extends from 50 to 600 watts. They are manufactured from high-quality titanium tube, therefore indestructible and sea water-proof. All Schego titanium heating elements are grounded and correspond to the high safety...

Apogee Protective carrying case Protective carrying case designed to transport and store Apogee meters, sensors, and accessories. Please note, this case does not fit the AM-320 underwater wand. It will fit a AM-310 telescopic wand, but that wand is not recommended for underwater use. Dimensions (LxWxH): Width approx. 27 cm Height approx. 16,5...

PAR meter MQ-510 The MQ-510 quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware. The meter consists of a waterproof quantum sensor attached via waterproof cable to a handheld meter. The waterproof sensor incorporates a blue-enhanced silicon photodiode...

Reefbot V2 ReefBot uses traditional reagent based method to autonomously measure the levels of the most common parameters in your tank. It currently measures Alkalinity (Alk), Calcium (Ca), Magnesium (Mg), Nitrate (NO3), Phosphate (PO4), Nitrite (No2), Ammonia (NH3), Copper (Cu) and Iodine (I2) with more parameters added regularly. Upgraded features<br...

Schego titanium heater&nbsp;50w The titanium heating elements from Schego are the optimum supplement to the temperature controller TR 1000. Their power range extends from 50 to 600 watts. They are manufactured from high-quality titanium tube, therefore indestructible and sea water-proof. All Schego titanium heating elements are grounded and correspond to the high...