Turbelle High Jet The Turbelle® High Jet is a replacement dosing pump with safety extra low voltage 12 V DC for Osmolator® nano 3152 and Osmolator® 3155 and belongs to a new generation of centrifugal pumps with a high delivery height and small dimensions. They are very quiet and almost wear-free thanks to the new pump bearings and high-performance drive. It is...
Turbelle High Jet The Turbelle® High Jet is a replacement dosing pump with safety extra low voltage 12 V DC for Osmolator® nano 3152 and Osmolator® 3155 and belongs to a new generation of centrifugal pumps with a high delivery height and small dimensions. They are very quiet and almost wear-free thanks to the new pump bearings and high-performance drive. It is...
Compact auto top-up This ULTRA COMPACT smart air filler unit makes a difference with the rest just by looking at it. But it goes beyond the "look", thanks to its twin optical sensors guarantees a safety superior to any other ATO on the market. H2Ocean ATO Diagram 600px Characteristics • Automatic recharge unit (ATO) • Compact...
Compact auto top-up This ULTRA COMPACT smart air filler unit makes a difference with the rest just by looking at it. But it goes beyond the "look", thanks to its twin optical sensors guarantees a safety superior to any other ATO on the market. H2Ocean ATO Diagram 600px Characteristics • Automatic recharge unit (ATO) • Compact...
RO water controller TUNZE RO Water Controller 8555 is an automatic water level controller used in the collection container of TUNZE RO station. The controller is also suitable for other water tanks or can be connected to an automatic refill system. It consists of a controller, two sensors, a water valve and an 12 V power supply unit. Depending on the use, the...
RO water controller TUNZE RO Water Controller 8555 is an automatic water level controller used in the collection container of TUNZE RO station. The controller is also suitable for other water tanks or can be connected to an automatic refill system. It consists of a controller, two sensors, a water valve and an 12 V power supply unit. Depending on the use, the...
Water valve operating on low voltage 9 to 12 V DC, replaces the enclosed meter pump in the Osmolator for several aquariums with gravity line, for example.
Water valve operating on low voltage 9 to 12 V DC, replaces the enclosed meter pump in the Osmolator for several aquariums with gravity line, for example.
Storage container 13L Container with a contents of 13L (3.4 USgal.); size for an open 250L (66 USgal.) tank: fill lasts for approx. one week, diam. 27,7 x 24,2 x 27cm (8.9 x 9.5 x 10.6 in.)
Storage container 13L Container with a contents of 13L (3.4 USgal.); size for an open 250L (66 USgal.) tank: fill lasts for approx. one week, diam. 27,7 x 24,2 x 27cm (8.9 x 9.5 x 10.6 in.)
Osmolator nano Water level controller with only one sensor for nano aquariums or small aquariums with up to 200 liters (55 USgal.). Can be installed in a cabinet filter or directly on the aquarium edge. Scope of delivery: ready for installation with 12 V power supply, low-voltage metering pump, 3 m (118") hose, magnet holder for up to 10 mm (3/8") glass thickness...
Osmolator nano Water level controller with only one sensor for nano aquariums or small aquariums with up to 200 liters (55 USgal.). Can be installed in a cabinet filter or directly on the aquarium edge. Scope of delivery: ready for installation with 12 V power supply, low-voltage metering pump, 3 m (118") hose, magnet holder for up to 10 mm (3/8") glass thickness...
Osmolator 3 A simple and reliable water level regulation system for both fresh and saltwater, featuring an optical control sensor and an independent thermal safety sensor. Maintaining a consistent water level ensures the stability of salt concentration in marine aquariums. It includes the Turbelle® High Jet 5030 dosing pump, equipped with built-in safeguards...
Osmolator 3 A simple and reliable water level regulation system for both fresh and saltwater, featuring an optical control sensor and an independent thermal safety sensor. Maintaining a consistent water level ensures the stability of salt concentration in marine aquariums. It includes the Turbelle® High Jet 5030 dosing pump, equipped with built-in safeguards...
Controlled Power Socket In the Osmolator, the enclosed low-voltage centrifugal pump can be replaced by this switched socket outlet in combination with a more powerful pump. The switched socket outlet can be used to switch metering pumps with 230 V (115 V), max. 1,800 W (900 W), such as Turbelle e-jet, Silence 1073.020, 1073.040 or a peristaltic pump.
Controlled Power Socket In the Osmolator, the enclosed low-voltage centrifugal pump can be replaced by this switched socket outlet in combination with a more powerful pump. The switched socket outlet can be used to switch metering pumps with 230 V (115 V), max. 1,800 W (900 W), such as Turbelle e-jet, Silence 1073.020, 1073.040 or a peristaltic pump.
Metering pump Replacement dosing pump with low voltage 3-12 V DC for Osmolator, power with 4 mm (.2") hose at 12 V: .9 m - 100 l/h (35.4" - 26.4 USgal.), 1.4 m - 80 l/h (55.2" - 21.1 Ugal.), 1.9 m - 58 l/h (74.8" - 15.3 USgal.), Hmax 3,6 m (141.7")
Metering pump Replacement dosing pump with low voltage 3-12 V DC for Osmolator, power with 4 mm (.2") hose at 12 V: .9 m - 100 l/h (35.4" - 26.4 USgal.), 1.4 m - 80 l/h (55.2" - 21.1 Ugal.), 1.9 m - 58 l/h (74.8" - 15.3 USgal.), Hmax 3,6 m (141.7")
Water Level Alarm This water level alarm comes with three sensors, a run-dry sensor and two overflow sensors. Each sensor comes with a holding device which can be attached with silicone or can be clamped to horizontal or vertical panes. The holding devices can also be combined. The control unit has an optical indicator for each sensor and an alert sound emitter.
Water Level Alarm This water level alarm comes with three sensors, a run-dry sensor and two overflow sensors. Each sensor comes with a holding device which can be attached with silicone or can be clamped to horizontal or vertical panes. The holding devices can also be combined. The control unit has an optical indicator for each sensor and an alert sound emitter.
Osmolator Water level regulator with two sensors suitable for use in cabinet filters, in Comline filters or directly on the edge of the aquarium. Scope of delivery: ready for mounting with power supply unit 12 V, metering pump, hose, magnet holder for sensors.
Osmolator Water level regulator with two sensors suitable for use in cabinet filters, in Comline filters or directly on the edge of the aquarium. Scope of delivery: ready for mounting with power supply unit 12 V, metering pump, hose, magnet holder for sensors.