The Turbelle controller is a pump controller for all Turbelle pumps with an electric motor, which is used to set the variable pump performance – especially for models without an integrated Turbelle controller. It can provide a wave motion simulation, oscillation flow, an automatic search for the resonance frequency when the oscillation flow is used, and it is also equipped with a food timer. If the Moonlight 7097.050 (not included in the scope of delivery) is attached to the Turbelle controller, the night mode operation will be activated au[...]
The Turbelle controller is a pump controller for all Turbelle pumps with an electric motor, which is used to set the variable pump performance – especially for models without an integrated Turbelle controller. It can provide a wave motion simulation, oscillation flow, an automatic search for the resonance frequency when the oscillation flow is used, and it is also equipped with a food timer. If the Moonlight 7097.050 (not included in the scope of delivery) is attached to the Turbelle controller, the night mode operation will be activated automatically. If this controller is connected to a second controller with the 7092.300 cable, a further pump can be connected and controlled, for example, to provide a wave motion simulation or an oscillating current. A third controller can be added using the Y adapter cable 7090.300.
An unbeatable team – Turbelle... pumps with electronic motor and TUNZE controller. They can reproduce real reef currents in your tank. TUNZE controller concentrate on the fundamentals. The following flow patterns can be produced in the aquarium very easily:
Wave simulation (pulse only) – Turbelle Controller / Multicontroller / SmartController 7000 By setting the maximum and minimum outputs as well as the pulse duration, high and low water velocities can be produced generating a natural wash of waves under a one-metre water column.
Simulation of tidal currents (interval) – Multicontroller / SmartController 7000 The pump channels are switched on or off alternately. The water flows through the reef from both sides at an adjustable switching time from 1 minute up to 12 hours.
Sequential pump circuit (sequential) – Multicontroller 7097 The Turbelle pumps are started sequentially, which permits the generation of a swelling current.
Random flow – Multicontroller / SmartController 7000 Random flow is generated by wave simulation and sequential pump operation. For quite a number of special reef zones (surf) this combination may produce an interesting water movement.
Oscillating current with Wavebox or Turbelle pumps – Turbelle Controller / Multicontroller / SmartController 7000 In Turbelle Controller / Multicontroller / SmartController 7000, the pump channels can be used as a Wavecontroller for the direct or alternating operation of the Wavebox or the Turbelle pumps. This function comprises the automatic search of the resonance frequency, which can be combined with wash of waves or high and low tide simulation.
Foodtimer – Turbelle Controller / Multicontroller / SmartController 7000 The pumps can be stopped completely by the push of a button to enable feeding. After about one to fifteen minutes (adjustable), a restart is carried out automatically.
Moon phase simulation (moonlight) – Turbelle Controller / Multicontroller / SmartController 7000 The controllers and Moonlight Turbelle with photo diode 7097.050 contain a moon-phase simulation function with LED light and adjustable 29-day moon phase.
Night setback (nightmode) – Turbelle Controller / Multicontroller / SmartController 7000 The photo-electric cell 7097.050 is used to reduce the performance of the Turbelle pumps at night. As in a reef, small animals and plankton can rise in the aquarium completing the natural cycle of diurnal and nocturnal animals occupying the habitat.
Storm for desedimentation (storm cycle) – Multicontroller 7097 / SmartController 7000 Like in nature, sediment should be removed from a reef aquarium in regular intervals. This function can be programmed in Multicontroller 7097 / SmartController 7000 to be carried out automatically. the pumps connected are controlled on the basis of an efficient and precise rhythm.
LED control (light control) – Multicontroller 7097 / SmartController 7000 Individual adjustment of the connected TUNZE LED color channels, with sunrise and sunset times, seasonal adjustments, moonlight, lightning simulation during the storm and de-sedimentation function, and demo-light for each light channel.