Turbelle stream 6105 eco For aquariums from 200 to 2,000 liters (53 to 528 USgal.) Flow rate: approx. 3,000 to 12,000 l/h (793 to 3,170 USgal./h) at 12 V Energy consumption: 3-11 W at 12 V Energy consumption: 11 W at 12,000 l/h (3,170 USgal./h) Power supply unit: 100–240V / 50–60Hz Cable length: 5 m (196.8") up to the...

Newa Jet NJ400 The Newa Jet NJ400 is a fully submersible mini liquid pump that, thanks to its optimal design and size, can be used in very small spaces, such as aquarium filtration system spaces. The 3 suction cup bracket is integrated into the pump without increasing the footprint. The very sleek and simple design has been optimized to...

Newa Micro 320 L/h Economical submersible micro-pump, ideal for aquariums, vivariums, table fountains and other decorations. Miniaturized, adjustable flow rate, quiet, minimal maintenance. Self-protected motor against overheating. Minimal power consumption.

Deflector for stream 50mm outlet 3D printing - PLA - reef compatible. Bracket attaches to the brace, allowing a pump to be placed without the need to attach a magnet to the outside of the tank. For example for the sides of the bin against a wall where there is not enough room to pass the external magnet. Or for any other reason requiring not to use the...

Stream 3 + for aquariums up to 3.000 liters (793 USgal.) Circulation performance: 2,500 l/h (660 USgal./h) to approx. 15,000 l/h (3962 USgal./h) with Turbelle® controller Energy consumption: from 3,5 to max. 50 W Power supply: 100-240V / 50-60Hz Cable length: 5 m Dimensions (L x W x H): 93 x 70.6 x 184 mm (3.7 x...

Reefdoser Evo 4 controller craddle 3d print - PLA

Deflector for stream 50mm outlet 3D printed - PLA - reef safe. Suits to all Tunze stream (and other pumps) with 50mm oultet diameter.

Deflector for stream 40mm outlet 3D printed - PLA - reef safe. Suits to all Tunze stream (and other pumps) with 40mm oultet diameter.

Deflector for stream 63mm outlet 3D printed - PLA - reef safe. Suits to all Tunze stream (and other pumps) with 63mm oultet diameter.

Vortech controller cradle 3d print - PLA Other sizes available, please contact us to give your size and we build it for you.

Moonlight Turbelle With photo diode. Simulates a 29-day moon phase and controls the night-time reduction at pumps with a Turbelle controller add-on or together with SmartController 7000. Suitable for all Turbelle electronic pumps with 5-pin connector and power supply unit.

Hydrofoamer Silence 9420 Mains connection: 230V/50 Hz (115V/60 Hz), 2m (79 in.) cable. Maximum air flow performance: 1,200l/h (317 USgal./h) at a water flow rate of 1,000l/h (264 USgal./h). Power consumption: 15W with an air flow rate of 1,200l/h (317 USgal./h), motor with protective thermostat. Pump outlet with ¾ in. BSP thread (NPT). Pump...