Axis 20 Hauteur maximale : ≈9 pieds (≈2,8 m) Débit: ≈400gph (≈1500lph) Consommation d'énergie: Variable, 20 W maximum Taille de réservoir recommandée : Jusqu'à ≈160 litres ...

Axis 90 AI Axis pumps are designed to ensure the circulation and rise of water between the filtration part and the main tank of the aquarium. They have several advantageous features for our use:

Set of cartridges for Glamorca R01

Care Magnet strong For a glass thickness of 15 to max. 20 mm (2/3" - ¾"). Width: 86 mm (3.4") Length: 140 mm (5.5") Including: 1 stainless steel blade, 2 spare plastic blades, 2 Care Booster, 4 clips, 8 colored end caps (blue, green, white, black).

Care Magnet strong+ For a glass thickness of 20 to max. 25 mm (¾" - 1"). Width: 86 mm (3.4") Length: 140 mm (5.5") Including: 1 stainless steel blade, 2 spare plastic blades, 2 Care Booster, 4 clips, 8 colored end caps (blue, green, white, black).

Care Magnet pico For 3 up to a glass thickness of 6 mm (.12" - .24"). Width: 40 mm (1.57") Length: 81 mm (3.19"). Inside part: 20 mm (.79") Outer part: 17 mm (.67") Plastic blades are firmly installed and not interchangeable. Care Magnet pico — significantly more compact than...

Tunze Care Magnet long + care booster For a glass thickness of 10 to max. 15 mm (3/8" - 2/3"). Width: 86 mm (3.4") Length: 140 mm (5.5") Including: 1 stainless steel blade, 2 spare plastic blades, 2 Care Booster, 4 clips, 8 colored end caps (blue, green, white, black).

Comline Filter 3162 For fresh and saltwater from 60 to 400 liters (15 to 105 USgal.), depending on tank load. Variable pump output from 250 to 850 l/h (70 to 225 US gal./h) Energy consumption: 2.5 - 4.5 W, 230V/50Hz (115V/ 60Hz) Dimensions (L x W x H): 110 x 90 x 255 mm (4.3" x 3.5" x 10") Max. immersion...

Membrane for RO1 The reverse osmosis membrane filter removes 99.9% of chemicals, dissolved solids, metals, bacteria and viruses, from water. Do not use when water is microbiologically unsafe or of unknown quality.

Sediment filter for RO1 The sediment filter removes sediment particles such as sand, silt, dirt, rust and other impurities up to a nominal size of 5 microns.

Deionisation filter for RO1 The deionization filter makes it possible to produce water of very high purity. This step makes it possible to remove the Anions and Cations still present in the water after the passage of the membrane. Very effective, it will allow you to obtain a TDS rate close to 0 and a possible conductivity of 0.1μm. Ideal values for the reef...

Carbon bloc filter for RO1 Le filtre à charbon actif en block élimine les impuretés telles que le chlore, les contaminants organiques, les pesticides et autres produits chimiques. Il élimine ou diminue goûts, couleurs et odeurs indésirables de l'eau et protège la membrane.