Set of cartridges for Glamorca R01

Digital Inline TDS - Titanium S2 Titanium S2 is an TDS meter in-line, with 2 probes , which allows you to measure, very simply and accurately monitor dissolved solids (TDS) at 2 locations of your choice, usually at the inlet and outlet...

Silicon tube 8x2mm - Price per meter - 8mm inner diameter - 2mm wall thickness

Titan screw 6x50mm 4 pieces

Silicon tube 6x2mm red - Price per meter - 6mm inner diameter - 2mm wall thickness

Digital Inline TDS - Titanium One Titanium One is a small, in-line TDS meter that enables you to measure and monitor dissolved solids (TDS) very simply and accurately at a location of your choice, usually at the inlet or outlet of a reverse osmosis plant. It allows you, for example, to see immediately...

Resin Silco 500ml

Sediment filter 5µ for Osmopure/Oxipure

Oxipure XL 75 (300l/d) Professional reverse osmosis designed and produced with triple pre-filtration and post-deionization system with Silco resins to ensure perfectly pure water even when heavily loaded with dissolved and suspended solids. The equipment is unique, it consists of 4 containers and 5 stages of operation, mounted on a single clamp, eliminating any...

Membrane for RO1 The reverse osmosis membrane filter removes 99.9% of chemicals, dissolved solids, metals, bacteria and viruses, from water. Do not use when water is microbiologically unsafe or of unknown quality.

Sediment filter for RO1 The sediment filter removes sediment particles such as sand, silt, dirt, rust and other impurities up to a nominal size of 5 microns.

Deionisation filter for RO1 The deionization filter makes it possible to produce water of very high purity. This step makes it possible to remove the Anions and Cations still present in the water after the passage of the membrane. Very effective, it will allow you to obtain a TDS rate close to 0 and a possible conductivity of 0.1μm. Ideal values for the reef...