Aquawind eco chic The TUNZE® Aquawind eco chic 7028.500 is a very low-noise aquarium ventilator provided with 12 V safety low voltage and it is easy to install on the edge of aquariums with a glass thickness of 0 up to 22 mm (0” - 0.866”). The angle of the Aquawind can be individually varied by tilt adjustment. The Aquawind creates an even air movement above the water surface...

Care Magnet strong For a glass thickness of 15 to max. 20 mm (2/3" - ¾"). Width: 86 mm (3.4") Length: 140 mm (5.5") Including: 1 stainless steel blade, 2 spare plastic blades, 2 Care Booster, 4 clips, 8 colored end caps (blue, green, white, black).

Care Magnet strong+ For a glass thickness of 20 to max. 25 mm (¾" - 1"). Width: 86 mm (3.4") Length: 140 mm (5.5") Including: 1 stainless steel blade, 2 spare plastic blades, 2 Care Booster, 4 clips, 8 colored end caps (blue, green, white, black).

Care Magnet pico For 3 up to a glass thickness of 6 mm (.12" - .24"). Width: 40 mm (1.57") Length: 81 mm (3.19"). Inside part: 20 mm (.79") Outer part: 17 mm (.67") Plastic blades are firmly installed and not interchangeable. Care Magnet pico — significantly more compact than...

Tunze Care Magnet long + care booster For a glass thickness of 10 to max. 15 mm (3/8" - 2/3"). Width: 86 mm (3.4") Length: 140 mm (5.5") Including: 1 stainless steel blade, 2 spare plastic blades, 2 Care Booster, 4 clips, 8 colored end caps (blue, green, white, black).

Comline Filter 3162 For fresh and saltwater from 60 to 400 liters (15 to 105 USgal.), depending on tank load. Variable pump output from 250 to 850 l/h (70 to 225 US gal./h) Energy consumption: 2.5 - 4.5 W, 230V/50Hz (115V/ 60Hz) Dimensions (L x W x H): 110 x 90 x 255 mm (4.3" x 3.5" x 10") Max. immersion...

Membrane for RO1 The reverse osmosis membrane filter removes 99.9% of chemicals, dissolved solids, metals, bacteria and viruses, from water. Do not use when water is microbiologically unsafe or of unknown quality.

Sediment filter for RO1 The sediment filter removes sediment particles such as sand, silt, dirt, rust and other impurities up to a nominal size of 5 microns.

Deionisation filter for RO1 The deionization filter makes it possible to produce water of very high purity. This step makes it possible to remove the Anions and Cations still present in the water after the passage of the membrane. Very effective, it will allow you to obtain a TDS rate close to 0 and a possible conductivity of 0.1μm. Ideal values for the reef...

Carbon bloc filter for RO1 Le filtre à charbon actif en block élimine les impuretés telles que le chlore, les contaminants organiques, les pesticides et autres produits chimiques. Il élimine ou diminue goûts, couleurs et odeurs indésirables de l'eau et protège la membrane.

Carbon filter for RO1

RO filter Glamorca RO1 with 1x set of cartridges The GLAMORCA reverse osmosis system produces optimal water for marine and freshwater aquariums.   With integrated deionization filter! The GLAMORCA reverse osmosis system is equipped with an additional cartridge after the membrane to remove the smallest residues of silicates and nitrates. It is thus...