€28.50Price
Subcategory
122 products
Grid
Grid-2
List
List-2
Catelog
€12.90Price
Filtration
Rack for Nano Tech Clear Cube (8 cubes) Cubes not included
€12.90Price
€12.90Price
3D printing
Holder for Tunze dosing pump V2 No more vibrations on the wall, loose pumps in the tank. We recommend coupling this support with one of our anti-vibration mats. Pump not included 3d print - PLA
€12.90Price
€13.90Price
Filtration
Rack for Nano Tech Block (4 blocks) Blocks not included
€27.90Price
Water tests
Oceamo Lab RO Water analysis The suitability of tap water for aquaristic use can also be checked with this analysis. At Oceamo, these samples are given full attention: because problems often arise in the reef tank already during the treatment of the source water. Our instruments are specially calibrated for your pure water samples, and we examine your sample for all...
€27.90Price
€69.90Price
Water tests
ICP-MS Seawater Analysis (sea water) Use the ICP-MS analysis to get a much more detailed view of pollutants and trace elements in your reef aquarium. With the Oceamo ICP-MS Analysis, your seawater analysis is performed with ICP-MS (instead of ICP-OES). ICP-MS (ICP with mass spectrometry) is significantly more sensitive and offers up to 10,000 times lower detection...
€69.90Price
€37.90€39.90Regular price-5.01% offPrice
Water tests
Oceamo Lab Classic Water analysis Use our Oceamo Lab Classic analysis to determine all essential chemical parameters in the reef aquarium: Oceamo Seawater analysis Basic parameters: alkalinity, salinity Macro elements: boron, bromide, calcium, chloride, potassium, magnesium, sodium, strontium, sulfate Trace elements: barium,...
€37.90€39.90Regular price-5.01% offPrice
€18.90Price
Black silicone glue for aquarium 300ml High performance glue for glass and mainly for terrariums and aquariums. MAIN CHARACTERISTICS Fast drying. Elastic permanence. Excellent adhesion. Permanent sealing. Aging resistant.
€18.90Price
€18.90Price
Transparent silicone glue for aquarium 300ml High performance glue for glass and mainly for terrariums and aquariums. MAIN CHARACTERISTICS Fast drying. Elastic permanence. Excellent adhesion. Permanent sealing. Aging resistant.
€18.90Price
€54.90Price
Frag plug
Optical grid 60x120cm (1cm thickness). Optical grid to raise the substrate, make frag supports etc.
€28.90Price
Frag plug
Optical grid 60x60cm (1cm thickness) - color: black. Optical grid to raise the substrate, make frag supports etc.
€28.90Price
€24.90Price
3D printing
Deflector for stream 50mm outlet 3D printing - PLA - reef compatible. Bracket attaches to the brace, allowing a pump to be placed without the need to attach a magnet to the outside of the tank. For example for the sides of the bin against a wall where there is not enough room to pass the external magnet. Or for any other reason requiring not to use the...
€24.90Price
€12.90Price
3D printing
Aqua Medic x.3 controller craddle For controller DC runner X.3 / SmartDirft X.3 and Ecodrift X.3 3d print - PLA