Pack Corall A,B,C + VitAmino M (500ml each) Trace element solution for soft, leather and hard corals Corall A, B and C contains all necessary combinations and elements for corals, without adding artificial colouring and preservatives. Already after the first dosings, an increased opening of the coral polyps can be observed. Natural colouring and increased...

Phosi-Ex 500ml Phosi-ex Silicate and Phosphate Filtration Media Net Contents 500ml NYOS® Phosi-EX is extremely effective, silicates and phosphates are absorbed quickly with this iron-based media. Targeted use of Phosi-EX will effectively prevent unwanted algae and your aquarium will be left with crystal clear...

Pure Iodine 50ml PURE IODINE Concentrated Iodine for Corals Net Content 50ml Nyos® Trace Elements are professional products developed over years of providing essential trace elements to your corals and invertebrates. Nyos® PURE IODINE contains elemental and concentrated iodine for maximum iodine supply in reef...

Holder for Tunze dosing pump V2 No more vibrations on the wall, loose pumps in the tank. We recommend coupling this support with one of our anti-vibration mats. Pump not included 3d print - PLA

AMS Doseo 1000ml For clear and healthy water in your aquarium. Elimination of harmful substances. Is anti-stress for the inhabitants of your aquarium. Dissolve 40g in 1000ml of reverse osmosis water.

AMS superphos SPS 1000ml AMS SuperPhos SPS Preventive phosphate remover that keeps the phosphate level low or lowers it very slowly, in SPS aquariums Absorbed substances are no longer released into the water. Instructions : 30gr per 100L gross, to be used in a fluidized bed filter for maximum efficiency. After filling your...

AMS superphos 1000ml Anti-phosphate resin. Usage:‎ ‎30g per 100L gross, to be used in a fluidized bed filter for maximum efficiency. After filling your filter with AMS SuperPhos, continue rinsing it with osmosis water until the water in the filter runs clear. ‎only then connect the fluidized bed filter to your...

Deflector for stream 50mm outlet 3D printing - PLA - reef compatible. Bracket attaches to the brace, allowing a pump to be placed without the need to attach a magnet to the outside of the tank. For example for the sides of the bin against a wall where there is not enough room to pass the external magnet. Or for any other reason requiring not to use the...

Funnel for reactor/filter v1.1 - large opening - 90mm Easily refill your calcium reactor or fluidized bed filter. Large opening for media (70mm), suitable for diameters from 70mm to 190mm thanks to its supports. 3D printing - PLA or ABS - non-contractual color.

50ml measuring beaker To measure the volumes of product to introduce into your aquarium. Material: plastic

Aqua Medic x.3 controller craddle For controller DC runner X.3 / SmartDirft X.3 and Ecodrift X.3 3d print - PLA

Nyos magnesium+ Nyos® MAGNESIUM+ is a high purity magnesium chloride. With MAGNESIUM+ you can increase the magnesium content in your saltwater aquarium quickly and simply. HOW TO DOSE: Pre-mixed solution (recommend): Mix 1000g (2.2lb) of MAGNESIUM+ to 2000ml (0.53gal) of RODI water. This solution contains 60,000mg/l Mg (ppm Mg). 17ml...