Auto cooling fan ACF-300 The Jebao cooling fan is an intelligent device for aquarium cooling! THIS IS NOT A WATER PUMP - DO NOT SUBMERCE IN WATER Features : Easy to install on the edge of the aquarium (maximum thickness 15MM) Accelerating the airflow on the water surface and the evaporation cooling function can cool the...

Auto cooling fan ACF-200 The Jebao cooling fan is an intelligent device for aquarium cooling! THIS IS NOT A WATER PUMP - DO NOT SUBMERCE IN WATER Features : Easy to install on the edge of the aquarium (maximum thickness 15MM) Accelerating the airflow on the water surface and the evaporation cooling function can cool the...

Aquawind eco chic The TUNZE® Aquawind eco chic 7028.500 is a very low-noise aquarium ventilator provided with 12 V safety low voltage and it is easy to install on the edge of aquariums with a glass thickness of 0 up to 22 mm (0” - 0.866”). The angle of the Aquawind can be individually varied by tilt adjustment. The Aquawind creates an even air movement above the water surface...

Holder for Tunze dosing pump V2 No more vibrations on the wall, loose pumps in the tank. We recommend coupling this support with one of our anti-vibration mats. Pump not included 3d print - PLA

TK500/1000/2000 hose fittings (x1)

Deflector for stream 50mm outlet 3D printing - PLA - reef compatible. Bracket attaches to the brace, allowing a pump to be placed without the need to attach a magnet to the outside of the tank. For example for the sides of the bin against a wall where there is not enough room to pass the external magnet. Or for any other reason requiring not to use the...

Funnel for reactor/filter v1.1 - large opening - 90mm Easily refill your calcium reactor or fluidized bed filter. Large opening for media (70mm), suitable for diameters from 70mm to 190mm thanks to its supports. 3D printing - PLA or ABS - non-contractual color.

Smart Temp Security Smart Temp Security immediately turns off the heater or cooler if the water temperature is outside 22.2 ℃ and 28.8 ℃. Smart Temp Security uses a miniature sensor to continuously monitor the temperature of the aquarium water. Plug and Play design, it does not require any adjustment.

Aqua Medic x.3 controller craddle For controller DC runner X.3 / SmartDirft X.3 and Ecodrift X.3 3d print - PLA

Mistral 3 fan Fan to lower the water temperature. - Large volume of pulsed air. - Low noise emission. - 90 ° adjustable support - Fan protection - 12v for more safety - For glass up to 13mm

Mistral 4 fan Fan to lower the water temperature. - Large volume of pulsed air. - Low noise emission. - 90 ° adjustable support - Fan protection - 12v for more safety - For glass up to 13mm

Mistral 5 fan Fan to lower the water temperature. - Large volume of pulsed air. - Low noise emission. - 90 ° adjustable support - Fan protection - 12v for more safety - For glass up to 13mm