Jumpguard feeding portal Fits to all kind of net!

Brace Bar set for jumpguard For larger aquariums or whenever fitting a cutout set we recommend installation of one or more brace bars to retain the structural integrity of the frame and to stop the outer edges from pulling in together. Each kit includes: 2 x 900mm x 12mm x 8mm brace bars 2 x T piece connectors 6 x...

Multi Cutout set for jumpguard Each Jumpguard Multi-cutout Set provides you with 3 different cutout options to allow you to modify the frame around any light brackets, cables or pipework etc.  Each kit contains 1 pair of 15mm offset corners  1 pair of 40mm offset corners 1 x 40mm x 120mm lighting bracket...

Flexi Cutout set for jumpguard The Jumpguard Flexi-cutout Set provides you with 2 standard corners and 2 reverse corners to allow you to modify the frame around any larger overflow boxes, light brackets, cables or pipework etc, that would not be covered by the Multi-Cutout Set.  Each kit contains 1 pair of standard...

jumpguard 180x90cm - V2 black mesh There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet. Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish...

jumpguard  120x75cm - V2 black mesh There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet. Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on...

jumpguard 75x75cm (Gen2 black mesh) There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet. Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish...

Hose support for siphon Support hose for your water changes or for any other operation requiring hose holding in the aquarium. Suitable for example siphoning or water replenishing. Hose up to 30mm Glass up to 15mm 3D printed. Color may change (white/silver).

Tank Cover Corners (pack of 4)

DIY Tank Cover (TC6060) DIY Tank Cover 60cm x 60cm (TC9060) DIY Tank Cover 90cm x 60cm (TC12090) DIY Tank Cover 120cm x 90cm (TC15090) DIY Tank Cover 150cm x 90cm (TC18090) DIY Tank Cover 180cm x 90cm

RO water controller TUNZE RO Water Controller 8555 is an automatic water level controller used in the collection container of TUNZE RO station. The controller is also suitable for other water tanks or can be connected to an automatic refill system. It consists of a controller, two sensors, a water valve and an 12 V power supply unit. Depending on the use, the...

Osmolator 3 A simple and reliable water level regulation system for both fresh and saltwater, featuring an optical control sensor and an independent thermal safety sensor. Maintaining a consistent water level ensures the stability of salt concentration in marine aquariums. It includes the Turbelle® High Jet 5030 dosing pump, equipped with built-in safeguards...