Apex I/O Breakout Box Connect external switches and I/O Inputs to your Apex When connected to the I/O Port of your Apex, Apex Lite, or PMx module, the Breakout Box gives you an easy way to connect up to six external switch inputs to your Apex. Examples of things you might connect in this manner include: - Float Switches for sump alerts or ATO...

Apex pH / ORP Probe Module – PM1 The PM1 probe module is just what you need if you want to monitor pH or ORP in your tank. And, there is an added bonus, you get an extra temperature port as well as six I/O switch inputs for use on ATO, feed buttons, leak alarms or whatever else you may come up with. This module is perfect for someone that wants to add...

Apex energy bar 632  (Schuko version) ENERGY BAR 832 – THE ULTIMATE POWER CONTROL HUB When we decided to create an Energy Bar for the most recently released Apex, we designed it from the ground up. Not only does the Energy Bar 832 have eight 120V AC outlets, but it includes an internal 100W 24VDC power supply as well. That power supply feeds...

Liquid Level Sensor with Clip Mount 58cm Innovative and unprecedented, a groundbreaking solution in the industry Continuous surveillance of water level depth Monitor evaporation, usage, dosing levels, and additional parameters Applicable in various settings, such as sumps, ATO reservoirs, AIO tanks, dosing containers, mixing stations, and...

A3 Apex Monitors critical parameters (temperature and pH) Makes it easy to track changes in your tank via any device Alerts you to changes Easily connects to other Apex-ready devices

Apex LD-2 probe Plug this probe into your FMM and then place it on any surface where you want to detect stray water. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place.  Time is so critical when it comes to water on the floor so it is very common to place two of these inside the stand and...

Apex NG entry level (APEXel) APEXel – THE ENTRY LEVEL APEX Lower cost version of its big-brother Apex Prevents catastrophes by monitoring temperature and pH in your aquarium, takes corrective actions for you, and alerts you via your smart phone when things go off track. Monitors your equipment – ensuring it is operating correctly at all times – and lets...

Apex NG base unit Apex NG Base unit Monitors key parameters in your aquarium Alerts via your smart phone Easy to use

Alternate Gyre Mode Modified Cable for IceCap Gyre Interface Module This cable allows you to run your Maxspect Gyre in both forward and reverse direction by using one full Variable Speed port on your Apex to connect two 0-10v signals to a single IceCap Gyre Interface Module. On your APEX, you will need to set up two Variable Speed outlets to control a...

Apex ICeCap: Maxpect Gyre Interface Module The IceCap Gyre Interface Module is an after-market product that will allow you to hook up your Maxspect Gyre pump to most 3rd party controllers by using an available 0-10 volt port. This makes the Module very versatile and almost universally compatible with most controllers including the Apex by Neptune Systems or the Reef...

AquaBus15EXT Extension Cable (M/F) 457 cm Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex, Modules, and Energy Bars together. Remember, although this is a USB type...

Dissolved Oxygen Probe Start measuring Dissolved Oxygen in your tank with this probe and the PM3