Oceamo Lab RO Water analysis The suitability of tap water for aquaristic use can also be checked with this analysis. At Oceamo, these samples are given full attention: because problems often arise in the reef tank already during the treatment of the source water. Our instruments are specially calibrated for your pure water samples, and we examine your sample for all...

ICP-MS Seawater Analysis (sea water) Use the ICP-MS analysis to get a much more detailed view of pollutants and trace elements in your reef aquarium. With the Oceamo ICP-MS Analysis, your seawater analysis is performed with ICP-MS (instead of ICP-OES). ICP-MS (ICP with mass spectrometry) is significantly more sensitive and offers up to 10,000 times lower detection...

Oceamo Lab Classic Water analysis Use our Oceamo Lab Classic analysis to determine all essential chemical parameters in the reef aquarium: Oceamo Seawater analysis Basic parameters:       alkalinity, salinity Macro elements:         boron, bromide, calcium, chloride, potassium, magnesium, sodium, strontium, sulfate Trace elements:          barium,...

Cleaning solution for pH, mV and conductivity electrodes.

CO2 valve set including non-return valve 7070.010 and a 5 m (196.8 in.) hose 7072.300.

pH electrode Tunze in glass Made of glass, BNC, cable length 2m (78.7 in.), suitable for units 7070 or 7070/2 or for commercially available measuring instruments.

pH electrode Tunze plastic Made of plastic, BNC, cable length 2m (78.7 in.), suitable for units 7070 or 7070/2 or for commercially available measuring instruments.

SeaTest densimeter SeaTest densitometer, description and features: Densitometer The SeaTest densitometer is an easy-to-use scientific instrument for measuring both the specific weight and density of tropical marine aquarium water. It is specially designed to accurately measure specific gravity from 1,000 to 1,030...

Testeur d'eau SeaTest MG SeaTest MG water tester, description and features: Magnesium Mg represents the 3rd most important element in the composition of seawater. It is essential to many biological processes, including photosynthesis and cell division. It is also involved in the formation of the skeleton of reef organisms. Keep out...

Testeur d'eau SeaTest CA SeaTest Ca water tester, description and features: Calcium Ca is one of the essential components of seawater. Corals, invertebrates and useful red calcareous algae consume the calcium present to build their skeletons. Ideal concentration: approx. 400 - 450 mg/l. Check calcium levels...

Testeur d'eau SeaTest PO4 SeaTest PO4 water tester, description and features: Phosphate PO4 is a residue from the breakdown of organic matter such as food scraps, fish droppings, etc.... It can cause algae proliferation. Although it is preferable to keep PO43- values as low as possible, values of up to 0.5 mg/l are tolerable....

Testeur d'eau SeaTest NO3 SeaTest NO3 water tester, description and features: Food waste, fish droppings and other organic matter containing nitrogen are broken down by bacteria during the nitrogen cycle into ammonium, and then into toxic nitrites. These are then transformed by other beneficial bacteria into harmless nitrates in low concentrations. In a...