Oceamo Lab RO Water analysis The suitability of tap water for aquaristic use can also be checked with this analysis. At Oceamo, these samples are given full attention: because problems often arise in the reef tank already during the treatment of the source water. Our instruments are specially calibrated for your pure water samples, and we examine your sample for all...

ICP-MS Seawater Analysis (sea water) Use the ICP-MS analysis to get a much more detailed view of pollutants and trace elements in your reef aquarium. With the Oceamo ICP-MS Analysis, your seawater analysis is performed with ICP-MS (instead of ICP-OES). ICP-MS (ICP with mass spectrometry) is significantly more sensitive and offers up to 10,000 times lower detection...

Oceamo Lab Classic Water analysis Use our Oceamo Lab Classic analysis to determine all essential chemical parameters in the reef aquarium: Oceamo Seawater analysis Basic parameters:       alkalinity, salinity Macro elements:         boron, bromide, calcium, chloride, potassium, magnesium, sodium, strontium, sulfate Trace elements:          barium,...

Cleaning solution for pH, mV and conductivity electrodes.

CO2 valve set including non-return valve 7070.010 and a 5 m (196.8 in.) hose 7072.300.

pH electrode Tunze in glass Made of glass, BNC, cable length 2m (78.7 in.), suitable for units 7070 or 7070/2 or for commercially available measuring instruments.

pH electrode Tunze plastic Made of plastic, BNC, cable length 2m (78.7 in.), suitable for units 7070 or 7070/2 or for commercially available measuring instruments.

Redox Controller Tunze The Redox Controller is a compilation consisting of the SmartController 7000 and the following accessories: - 7070.120 Controlled Power Socket - 7055.100 mV electrode made of glass - 7070.300 pH / mV electrode holder - 7075.150 Redox Test Solution +475 mV, 50 ml (1.67 oz.) Each in a separate package. Only...

Calibration solution 600 µS/cm For fresh water.

Buffer solution for pH 5 and 7 for all pH measuring instruments.

Buffer solution for pH 7 and 9 for all pH measuring instruments.

mV Electrode made of glass, BNC, cable length 2 m (78.7 in.), suitable to replace Redox Controller 7075.000, 7000.000 or commercially available mV measuring instruments.