Résine MB 20 2000ml With this ion exchange resin you get distillate-like water of the highest purity, free of silica. Thus diatoms are stopped, planarians and unwanted cyanobacteria are permanently inhibited by the removal of SiO2. MB 20 mixed bed demineralization for ion exchange columns e.g. Silica filter or Aqualight filter. Always...

Résine MB 20 1000ml With this ion exchange resin you get distillate-like water of the highest purity, free of silica. Thus diatoms are stopped, planarians and unwanted cyanobacteria are permanently inhibited by the removal of SiO2. MB 20 mixed bed demineralization for ion exchange columns e.g. Silica filter or Aqualight filter. Always install...

Digital Inline TDS - Titanium One Titanium One is a small, in-line TDS meter that enables you to measure and monitor dissolved solids (TDS) very simply and accurately at a location of your choice, usually at the inlet or outlet of a reverse osmosis plant. It allows you, for example, to see immediately...

Resin Silco 500ml

Sediment filter 5µ for Osmopure/Oxipure

Mixed bed resin (MB 20 like) 2500ml AQUA mixed bed resin is a high quality and very rich food grade mixed bed resin. It produces purest water with a conductance below 1 μS. The volume share of about 40% cation component to 60% anion component guarantees a constant water treatment over the entire service life. The optimum composition prevents partial or premature...

Mixed bed resin (MB 20 like) 5000ml AQUA mixed bed resin is a high quality and very rich food grade mixed bed resin. It produces purest water with a conductance below 1 μS. The volume share of about 40% cation component to 60% anion component guarantees a constant water treatment over the entire service life. The optimum composition prevents partial or premature...

UF filter all in one type, with housing

Membrane housing For RO membrane or ultrafiltration membrane

Membrane for RO1 The reverse osmosis membrane filter removes 99.9% of chemicals, dissolved solids, metals, bacteria and viruses, from water. Do not use when water is microbiologically unsafe or of unknown quality.

Sediment filter for RO1 The sediment filter removes sediment particles such as sand, silt, dirt, rust and other impurities up to a nominal size of 5 microns.

Deionisation filter for RO1 The deionization filter makes it possible to produce water of very high purity. This step makes it possible to remove the Anions and Cations still present in the water after the passage of the membrane. Very effective, it will allow you to obtain a TDS rate close to 0 and a possible conductivity of 0.1μm. Ideal values for the reef...