Flow heater 2.0 500w Flow Heater 2.0 is an instant water heater with Smart Heating System (SHS) - intelligent power selection technology. The heater is mounted outside the aquarium, so it does not take up space inside and offers more design freedom.

Flow heater 2.0 300w Flow Heater 2.0 is an instant water heater with Smart Heating System (SHS) - intelligent power selection technology. The heater is mounted outside the aquarium, so it does not take up space inside and offers more design freedom.

Coral Gel Duo 10g Two-component fast glue. Particularly suitable for bonding corals or underwater equipment. Particularities: • Can be used directly under water thanks to the mixing tip without the risk of polymerization of the contents of the tube. • Filling of gaps up to 6 mm, also suitable for porous...

Coral Gum fast 115 g Two-component epoxy putty. Particularly indicated for the fixation of hard corals on plots with cuttings or reefs. Mixing time: 3-4 minutes. Possibility of handling: 8-10 min (complete hardening in 24h). Content: 115g

Oceamo Lab RO Water analysis The suitability of tap water for aquaristic use can also be checked with this analysis. At Oceamo, these samples are given full attention: because problems often arise in the reef tank already during the treatment of the source water. Our instruments are specially calibrated for your pure water samples, and we examine your sample for all...

ICP-MS Seawater Analysis (sea water) Use the ICP-MS analysis to get a much more detailed view of pollutants and trace elements in your reef aquarium. With the Oceamo ICP-MS Analysis, your seawater analysis is performed with ICP-MS (instead of ICP-OES). ICP-MS (ICP with mass spectrometry) is significantly more sensitive and offers up to 10,000 times lower detection...

Oceamo Lab Classic Water analysis Use our Oceamo Lab Classic analysis to determine all essential chemical parameters in the reef aquarium: Oceamo Seawater analysis Basic parameters:       alkalinity, salinity Macro elements:         boron, bromide, calcium, chloride, potassium, magnesium, sodium, strontium, sulfate Trace elements:          barium,...

Ion Director Multi-Reference Highly precise and stabilized reference solution for ION Director calibration and cross-checking. Max. tol. +/ - 1% Ca: 420 mg/l Mg: 1300 mg/l K: 390 mg/l Na: 10700 mg/l NO3 11 mg/l

Ion Director reference B 500ml

Ion Director reference B 1000ml

Ion Director reference A 1000ml

Ion Director reference A 500ml