Turbelle High Jet The Turbelle® High Jet is a replacement dosing pump with safety extra low voltage 12 V DC for Osmolator® nano 3152 and Osmolator® 3155 and belongs to a new generation of centrifugal pumps with a high delivery height and small dimensions. They are very quiet and almost wear-free thanks to the new pump bearings and high-performance drive. It is...

Refill system 2.0 Easy and safe refilling of evaporated water in the aquarium - Permanent monitoring of the water level in the aquarium by means of a trouble-free and maintenance-free Reed sensor with delay circuit (no disturbance due to surface movement) - Automatic refilling of evaporated aquarium water. - Variable sensor holder...

Refill System easy Refill system with pump and sensor Easy and safe refilling of evaporated water in the aquarium - Permanent monitoring of the water level in the aquarium with an infrared sensor incl. delay circuit - Automatic refilling of evaporated aquarium water - Dry-running protection of the refilling pump - Easy installation and...

Refill depot 16l with cap and tap Dimensions (l x w x h): app. 320 x 170 x 310 mm Total height incl. cap: app. 380 mm

Refill depot 16l with cut-out and cap Dimensions (l x w x h): app. 320 x 170 x 310 mm Total height incl. cap: app. 380 mm

Support for sensor

Optical floating level sensor for Kore 5th Optical floating level sensor with acrylic adjustable holder

RO water controller TUNZE RO Water Controller 8555 is an automatic water level controller used in the collection container of TUNZE RO station. The controller is also suitable for other water tanks or can be connected to an automatic refill system. It consists of a controller, two sensors, a water valve and an 12 V power supply unit. Depending on the use, the...

Water valve operating on low voltage 9 to 12 V DC, replaces the enclosed meter pump in the Osmolator for several aquariums with gravity line, for example.

Storage container 13L Container with a contents of 13L (3.4 USgal.); size for an open 250L (66 USgal.) tank: fill lasts for approx. one week, diam. 27,7 x 24,2 x 27cm (8.9 x 9.5 x 10.6 in.)

Metering pump Replacement dosing pump with low voltage 3-12 V DC for Osmolator, power with 4 mm (.2") hose at 12 V: .9 m - 100 l/h (35.4" - 26.4 USgal.), 1.4 m - 80 l/h (55.2" - 21.1 Ugal.), 1.9 m - 58 l/h (74.8" - 15.3 USgal.), Hmax 3,6 m (141.7")

Osmolator nano Water level controller with only one sensor for nano aquariums or small aquariums with up to 200 liters (55 USgal.). Can be installed in a cabinet filter or directly on the aquarium edge. Scope of delivery: ready for installation with 12 V power supply, low-voltage metering pump, 3 m (118") hose, magnet holder for up to 10 mm (3/8") glass thickness...