Axis 20 Hauteur maximale : ≈9 pieds (≈2,8 m) Débit: ≈400gph (≈1500lph) Consommation d'énergie: Variable, 20 W maximum Taille de réservoir recommandée : Jusqu'à ≈160 litres ...

Axis 90 AI Axis pumps are designed to ensure the circulation and rise of water between the filtration part and the main tank of the aquarium. They have several advantageous features for our use:

Reagents for HI 775 and HI833xx - 25 tests

Set of cartridges for Glamorca R01

Magnesium Hardness Checker HC The hardness or hydrometric titer (TH) of water essentially corresponds to the presence of calcium and magnesium salts. It is directly linked to the geological nature of the terrain crossed. A calcareous soil will give hard water while a granite soil will produce rather soft water. The total hardness represents the sum of the calcium and...

Mixed bed resin (MB 20 like) 2500ml AQUA mixed bed resin is a high quality and very rich food grade mixed bed resin. It produces purest water with a conductance below 1 μS. The volume share of about 40% cation component to 60% anion component guarantees a constant water treatment over the entire service life. The optimum composition prevents partial or premature...

Mixed bed resin (MB 20 like) 5000ml AQUA mixed bed resin is a high quality and very rich food grade mixed bed resin. It produces purest water with a conductance below 1 μS. The volume share of about 40% cation component to 60% anion component guarantees a constant water treatment over the entire service life. The optimum composition prevents partial or premature...

pH 4 calibration solution 1 bag

pH 7 calibration solution

Membrane for RO1 The reverse osmosis membrane filter removes 99.9% of chemicals, dissolved solids, metals, bacteria and viruses, from water. Do not use when water is microbiologically unsafe or of unknown quality.

Sediment filter for RO1 The sediment filter removes sediment particles such as sand, silt, dirt, rust and other impurities up to a nominal size of 5 microns.

Deionisation filter for RO1 The deionization filter makes it possible to produce water of very high purity. This step makes it possible to remove the Anions and Cations still present in the water after the passage of the membrane. Very effective, it will allow you to obtain a TDS rate close to 0 and a possible conductivity of 0.1μm. Ideal values for the reef...