Set of reagents for determining magnesium concentration in freshwater.

Set of reagents for determining iodine concentration in seawater.

Set of reagents for determining iron concentration in fresh and sea water.

Reagent set for determining total chlorine concentration in freshwater.

Set of reagents for determining the concentration of free chlorine in fresh water.

Set of reagents for determining calcium concentration in fresh water.

Set of reagents for determining calcium concentration in seawater.

Oceamo Lab RO Water analysis The suitability of tap water for aquaristic use can also be checked with this analysis. At Oceamo, these samples are given full attention: because problems often arise in the reef tank already during the treatment of the source water. Our instruments are specially calibrated for your pure water samples, and we examine your sample for all...

ICP-MS Seawater Analysis (sea water) Use the ICP-MS analysis to get a much more detailed view of pollutants and trace elements in your reef aquarium. With the Oceamo ICP-MS Analysis, your seawater analysis is performed with ICP-MS (instead of ICP-OES). ICP-MS (ICP with mass spectrometry) is significantly more sensitive and offers up to 10,000 times lower detection...

Oceamo Lab Classic Water analysis Use our Oceamo Lab Classic analysis to determine all essential chemical parameters in the reef aquarium: Oceamo Seawater analysis Basic parameters:       alkalinity, salinity Macro elements:         boron, bromide, calcium, chloride, potassium, magnesium, sodium, strontium, sulfate Trace elements:          barium,...

Smart Temp Security Smart Temp Security immediately turns off the heater or cooler if the water temperature is outside 22.2 ℃ and 28.8 ℃. Smart Temp Security uses a miniature sensor to continuously monitor the temperature of the aquarium water. Plug and Play design, it does not require any adjustment.

Smart Stir AutoAqua Smart Stir is a handy gadget to help the aquarist perform accurate water analyzes. Water testing is important to ensure the success of a home aquarium. For accurate testing, most liquid test kits require the water sample to be mixed or stirred after adding a reagent. In some cases, you need to add one drop of reagent at a time,...